Block Wall Installation
Block Wall Installation in the East Valley
Get matched with a licensed local masonry contractor for a new CMU perimeter or privacy wall — free, no obligation.
As of September 2026, block wall (CMU) installation in the East Valley typically costs $35–$65 per linear foot installed, or roughly $3,000–$10,000+ for a residential-scale project — the highest-cost but longest-lasting (40+ years) perimeter option available. East Valley Fence & Wall Pro matches you with a licensed local masonry contractor for a free quote.
Concrete masonry unit (CMU) block wall is the standard for permanent perimeter walls across the East Valley — it's what most new-build HOA communities require along rear and side property lines, especially where a lot backs to a common area, wash, or another property.
Residential vs. HOA/Community-Scale Projects
Most homeowner projects fall into two categories: a residential-scale perimeter section (replacing or adding a run of backyard or side-yard wall) and larger HOA/community perimeter work (shared walls along a subdivision boundary or common area, typically contracted through the HOA itself rather than an individual homeowner). This site focuses on matching homeowners with contractors for the former — individual residential and smaller commercial block wall projects.
What a Block Wall Project Involves
- Footing and layout: a proper CMU wall needs a poured concrete footing sized to the wall height and local soil conditions — this is the step that most affects long-term durability.
- Block coursing: standard 6"–8" CMU block, stacked and mortared in courses, often with steel reinforcement (rebar) in the cells for wall heights beyond a few feet.
- Finish: stucco and paint is the common East Valley finish, often matched to HOA-approved color palettes; some walls stay exposed block ("slump block" or split-face styles) for a different look.
- Gates and access points: pedestrian or vehicle gates integrated into the wall line, if needed.
What Affects Installation Cost
- Wall height and total linear footage
- Footing depth required for your soil and the wall's engineered load
- Finish — exposed block vs. stucco and paint
- Gates, access points, and any decorative caps or pilasters
- Site access for equipment and material delivery
See a full cost breakdown in our Block Wall Cost guide.
Licensing
Block wall and masonry work is licensed in Arizona under ROC classification CR-31 (or C-31/R-31) — a separate classification from the CR-14 fencing license used for wood, vinyl, chain-link, and iron fencing. We only match homeowners with contractors who report holding the applicable active license — verify directly at azroc.gov. See our Licensed vs. Unlicensed Contractors guide for the full CR-14/CR-31 explainer.
Get Matched With a Block Wall Contractor
Tell us about your project and we'll connect you with a licensed local pro — free, no obligation.
Frequently Asked Questions
How much does block wall installation cost in the East Valley?
Residential-scale block wall projects typically run $3,000–$10,000+, or roughly $35–$65 per linear foot installed, depending on height, finish, and gates. See our full Block Wall Cost guide.
Is block wall required by my HOA?
Many East Valley HOAs require or strongly prefer block wall for rear and side perimeter fencing, especially where a property backs to a common area, wash, or another lot. Check your HOA's CC&Rs before planning your project.
Do block wall contractors need a special license?
Yes — masonry and block wall work is licensed under Arizona ROC classification CR-31 (or C-31/R-31), separate from the CR-14 fencing classification. We only match homeowners with contractors who report holding the applicable active license.
How long does block wall installation take?
A typical residential perimeter section takes several days to a couple of weeks depending on length, footing depth, and whether a stucco/paint finish is included; larger HOA/community perimeter projects take longer.