Cost Guide
Fence Installation Cost in the East Valley (2026)
Real per-material price ranges for Gilbert, Chandler, Mesa, Queen Creek & San Tan Valley, AZ.
As of September 2026, fence installation in the East Valley costs $10-$45 per linear foot installed depending on material, or roughly $1,500-$9,000 for a typical whole-yard project. Call East Valley Fence & Wall Pro at (555) 010-1000 or get matched with a licensed local contractor below for a free, itemized quote.
Cost by Material
| Material | Cost per Linear Foot Installed | Typical Lifespan |
|---|---|---|
| Chain-Link | $10-$25 | 15-20 years |
| Wood | $15-$35 | 10-15 years |
| Vinyl | $20-$40 | 20-30 years |
| Ornamental Iron | $25-$45 | 20+ years |
| Block Wall (CMU) | $35-$65 | 40+ years |
Methodology
These ranges reflect East Valley / greater Phoenix-metro market research gathered from national cost-aggregator benchmarks (HomeGuide, Angi, ProMatcher) and Arizona-specific pricing calculators, cross-checked against local competitor pricing pages, as of this guide's publish date. Actual quotes vary by contractor, material grade, site conditions, and current material costs — always get a written, itemized quote before committing.
What Drives Cost Up or Down
- Linear footage: the biggest single driver — a small side-yard run costs far less than a full-perimeter enclosure.
- Gates and corners: each gate and corner post adds labor and hardware cost.
- Soil conditions: East Valley caliche (a hard, cemented soil layer) can slow post-hole digging and add labor time versus easy-digging soil.
- Height and finish: taller fences and HOA-required finishes (stucco cap on block, matched paint) add cost.
- Removal: hauling away an existing fence before installing the new one is often a separate line item.
Permit Costs
Some East Valley cities require a permit for taller fences or front-yard fencing; permit fees themselves are typically a smaller cost relative to material and labor, but confirm with your contractor and city before starting. See our Arizona fence permit & HOA guide.
Get a Free Quote From a Licensed Local Pro
Tell us about your project and we'll connect you with a licensed local pro — free, no obligation.
Frequently Asked Questions
What is the average cost to install a fence in the East Valley?
Most whole-yard projects run $1,500-$9,000, averaging roughly $4,000-$5,500, depending on material, length, and gate count.
What is the cheapest fence material?
Chain-link is the least expensive option at $10-$25 per linear foot installed, followed by wood at $15-$35 per linear foot.
Does the price include permits?
Not always — ask each contractor whether their quote includes permit handling or if that's billed separately. Permit fees themselves are typically a smaller line item relative to material and labor.
Why do quotes vary so much between contractors?
Material grade, post spacing, footing depth for block wall sections, soil/caliche conditions, and whether haul-away of old fencing is included all shift the total. Get at least two written, itemized quotes to compare apples to apples.